Improving the acoustic parameters of the room

High-quality reproduction of musical content in a room depends not only on the sound equipment, but also on the parameters of the room, how and how the room is decorated and the geometry of the hall. To create a comfortable sound in the hall, as in a recording studio, it is necessary to fulfill certain requirements for the finishing of walls, ceiling and floor.

At the stage of design and renovation of a room, all necessary criteria are taken into account to improve acoustics, observing the main parameter - reverberation time. For certain types of halls there is a standard value for the reverberation time depending on the volume that must be observed.

In rooms where increased intelligibility of speech and musical content is required, special attention must be paid to the reverberation time. This is required in rooms such as: conference rooms, lecture halls, concert halls, theater halls, as well as sports halls or stadiums to improve speech intelligibility.

Calculations of reverberation time and selection of materials for cladding are carried out in the specialized program EASE 4.4, where an accurate 3D model of the hall is created and materials for walls, ceilings and floors are selected. Together with engineers and designers for this facility, all of the above materials and changes in the geometry of the room are agreed upon.

After all calculations and approvals on the facing materials have been made, the acoustic systems are distributed in the 3D model and the main acoustic parameters of the hall are calculated: speech intelligibility, music intelligibility, and others.

If it is not possible to renovate the premises by replacing or selecting cladding materials, then you need to select it at the initial stage. But without improving the acoustic properties of the room, it happens that the selected room is not suitable for playing music: long reverberation time, numerous reflections of sounds, humming at low frequencies, etc. All this needs to be eliminated and the acoustic characteristics of the hall should be brought to good sound.

Our company is engaged in acoustic calculations and improvement of the acoustic parameters of the hall, we analyze the room, calculate the reverberation time and, based on all the analyses, calculate the necessary sound absorption of the hall using special sound-absorbing materials: acoustic traps, panels for absorbing certain frequency ranges.

After making recommendations on sound absorption, our company supervises the installation, supply of these materials and installation.

At the moment, there are very few companies that can offer comprehensive services from the selection of facing materials along with installation to installation and tuning of speaker systems.